159-0323-5663

原保浙模具

首页 >> 新闻资讯 >>行业动态 >> 化粪池模具制作工艺流程是怎样的呢
详细内容

化粪池模具制作工艺流程是怎样的呢

今天,我们将简要谈谈化粪池模具的加工工艺:

1、模具材料不好,在后续加工中容易断裂,热处理和不适当的淬火和回火工艺会造成变形;

Mold material is not good, easy to break in the subsequent processing, heat treatment and improper quenching and tempering process will cause deformation;

2、模具打磨的平整度不够,导致弯曲变形;

The flatness of mould grinding is not enough, resulting in bending deformation;

3、模具强度不够,刀口过紧,模具结构不合理,模块数量不够,没有垫板或脚垫;

The die strength is not enough, the cutting edge is too tight, the die structure is unreasonable, the number of modules is not enough, there is no pad or foot pad;

4、螺纹切割不当、拉线、间隙不正确、角度不清;

Improper thread cutting, cable drawing, incorrect clearance and unclear angle;

5、冲压设备的选择、冲压吨位、冲裁力不够,调整模具过深;

The selection of stamping equipment, punching tonnage and punching force are not enough, and the adjustment of die depth is too deep;

6、生产前没有退磁处理,也没有退料嘴;

Before production, there is no demagnetization treatment and no return nozzle;

7、在生产过程中,会出现断针、断弹簧等粘料;

In the production process, there will be broken needle, broken spring and other sticky materials;

8、层压冲压,定位不到位,模板有裂纹仍继续产生。

Lamination stamping, positioning is not in place, and cracks continue to occur in the formwork


关于我们
更多
关于我们

扫一扫添加微信

保浙模具

联系保浙

保定保浙模具制造有限公司
联系人:冉经理
联系电话:15903235663
地址:清苑工业区
邮箱:867777563@qq.com


保定保浙模具制造有限公司



技术支持: 创和全网营销 | 管理登录